Nema 34 Bipolar Stepper Motor 6.0A 12.0Nm Double-flat shaft

Key Features:
  • Step angle: 1,8 ± 5% °
  • Rated current/phase: 6.0 A
  • Rated voltage: 3.6 V
  • Phase Inductance: 8.0 mH
  • Phase resistance: 0.6 Ω
  • Holding torque: 12.0 Nm
  • Detent Torque: 24.5 Ncm
  • Motor Length: 151 mm

78.40

5 in stock
Add to wishlist Add to compare

Description

Introduction

Stepper motors convert electric pulses into mechanical movement in stepped increments. The rotation has a direct relationship with the applied pulses. The sequence of the pulses dictates the direction of the motor shaft rotation, the frequency of the pulses dictates the speed of the shaft rotation, and the number of input pulses applied is directly related to the distance of rotation.

There are many advantages to using stepper motors. Among others, they have full torque at standstill, offer excellent response to starting and stopping, and provide open loop control. This stepper motor also have step accuracies of 5% of the step, which provides precise positioning and repeatability of movement. These features make it possible to achieve very slow speed synchronous rotation with a load directly coupled to the shaft—ideal for positioning applications.

This is two-phase stepper motors, which are the most common type of stepper motors. They operate by alternating the magnetic field the windings produce by changing the direction of the current in the windings. Thus, attracting or repelling the magnetic poles of the rotor causes it to rotate in step with the incoming pulses. Two-phase steppers come in unipolar and bipolar versions. This 34HS5460 stepper motor is a bipolar version.

One of the major benefits of a bipolar stepper motor is that they provide more torque at low speeds when compared to unipolar stepper motors. This means that bipolar stepper motors are best suited for applications that require high torque at low speeds.

Bipolar stepper motors require special drive circuit, called an H bridge. This 34HS5460 stepper motor is compatible with DM860 driver.

How to connect 34HS5460 stepper motor to driver?

  • Wire color meaning: Red A+, Green A-, Yellow B+, Blue B-
  • For more information on how to connect this stepper motor to DM860, click on this link. 
  • You are always welcome to contact us if you need help. Contact us. We will gladly help you.

Features:

  • High torque
  • Smooth movement
  • High efficiency
  • Energy-saving
  • Low noise
  • Low vibration
  • High start torque
  • Low start current
  • Reliable performance.

Specifications:

Series
Model
34HS5460
Frame Size Nema34
Step Angle
(°)
1.8
Motor Length
(mm)
151
Rated Voltage
(V)
3.6
Rated Current
(A/Phase)
6.0
Phase Resistance
(Ω)
0.6
Phase Inductance
(mH)
8
Holding Torque
(N.m Min)
12.0
Detent Torque
(N.m Max)
0.24
Rotor Inertia
(g.cm²)
4000
Shaft Single Shaft
Shaft Diameter
(mm)
14
Front Shaft Length
(mm)
37
Lead Wire
(No.)
4

Red A+, Green A-, Yellow B+, Blue B-

Motor Weight
(g)
5000

Specification

Step angle

1,8 ± 5% °

Frame Size

Nema 34

Number of Phases

2

Rated current/phase

6.0 A

Rated voltage

3.6 V

Phase Inductance

8.0 mH

Phase resistance

0.6 Ω

Holding torque

12.0 Nm

Detent Torque

24.5 Ncm

Rotor Inertia

4000 g.cm²

Shaft Diameter

14 mm

Number of Wires

4

Motor Length

151 mm